The RPS 1000 offers one of the highest levels of redundancy in the industry, translating into a greater level of reliability. All major components have at least one back up system and in some cases as many as fourfold. No single failure will ever result in the system being inoperable. The HMI (Human Machine Interface) offers one of the most sophisticated systems of diagnostics in the industry. It is an industry first (patent pending) and provides a high level of detection IN ADVANCE of any failures, minimizing downtime. It is understood that any mechanical or electronic component can fail. However, the beauty of the system is that even in the case of failure, it continues to operate due to the high level of redundancy and the early warning signals. The uptime of the system is unprecedented.

The facade is completely flexible and can be designed to blend in with the neighboring buildings with a look that is contemporary, historic, traditional etc. The materials that can be used are completely versatile as well — concrete, wood, brick, stone, aluminum, etc. It is completely up to the imagination of the owner and his/her architect.

From a user perspective, it is a very safe and convenient system. The system virtually eliminates the risk of any vehicle damage or theft and the risk of personal injury or robbery that can occur in regular parking lots because drivers remain safely outside the building at all times. Imagine, arriving to your destination. Rather than having to spend an exorbitant amount of time driving around looking for a space to park, you drive right up to the garage, drive in at ground level into a well lit easy access entrance area, get out of your car, push a button and then you simply walk away. Hassle free!

Underground applications are particularly well suited to this system. Because only half the space is needed, one can realize as much as 50% cost savings on the excavation alone. Also, due to lower lighting and ventilation requirements (since no cars are driving around and no one is walking inside), lower insurance costs, lower personnel expenses, land savings, etc. the overall development costs can be significantly lower than for a conventional garage.

In addition, this system offers a pollution free alternative. No cars are running inside, so there are no choking car emissions to have to deal with inside the garage. Also, because cars are not having to circle around and around the block looking for spaces, there is less pollution (and less traffic) from cars driving at slow paces for extended periods of time. They get off the street faster!

The RPS 100 provides redundancy and its patent pending sophisticated diagnostic tool (HMI: Human Machine Interface) helps ensure the garage’s uninterrupted operation. It is the only intermediate sized automated parking garage with true redundancy, meaning actual back up of the complete unit, thus maintaining a higher percentage of uptime.

Like all of the Robotic Parking garages, this system solves major parking needs while adding significant value and aesthetic appeal to the areas in which it is built.

The facade is completely flexible and can be designed to blend in with the neighboring buildings with a look that is contemporary, historic, traditional etc. The materials that can be used are completely versatile as well — concrete, wood, brick, stone, aluminum, etc. It is completely up to the imagination of the owner and his architect.

From a user perspective, it is a very safe and convenient system. The system virtually eliminates the risk of any vehicle damage or theft and the risk of personal injury or robbery that can occur in regular parking lots because drivers remain safely outside the building at all times. Imagine, arriving to your destination. Rather than having to spend an exorbitant amount of time driving around looking for a space to park, you drive right up to the garage, drive in at ground level into a well lit easy access entrance area, get out of your car, push a button and then you simply walk away. Hassle free!

Underground applications are particularly well suited for this system. Because only half the space is needed, one can realize as much as 50% cost savings on the excavation alone. Also, due to lower lighting and ventilation requirements (since no cars are driving around and no one is walking inside), lower insurance costs, lower personnel expenses, land savings, etc. the overall development costs can be significantly lower than for a conventional garage.

In addition, this system offers a pollution free alternative. No cars are running inside, so there are no choking car emissions to have to deal with inside the garage. Also, because cars are not having to circle around and around the block looking for spaces, there is less pollution (and less traffic) from cars driving at slow paces for extended periods of time. They get off the street faster!

It is ideally suited for condominium, apartment, hotel, small office building development projects where land is very limited (and expensive) and a large part of the success of the project is dependent upon the capability to fill the parking requirements, which can’t be easily met with a conventional garage. The RPS 20 series in these cases is a developer’s dream!

The facade is completely flexible and can be designed to blend in with the neighboring buildings with a look that is contemporary, historic, traditional etc. The materials that can be used are completely versatile as well — concrete, wood, brick, stone, aluminum, etc. It is completely up to the imagination of the owner and his architect.

From a user perspective, it is a very safe and convenient system. The system virtually eliminates the risk of any vehicle damage or theft and the risk of personal injury or robbery that can occur in regular parking lots because drivers remain safely outside the building at all times. Imagine, arriving to your destination. Rather than having to spend an exorbitant amount of time driving around looking for a space to park, you drive right up to the garage, drive in at ground level into a well lit easy access entrance area, get out of your car, push a button and then you simply walk away. Hassle free!

Underground applications are particularly well suited for this system. Because only half the space is needed, one can realize as much as 50% cost savings on the excavation alone. Also, due to lower lighting and ventilation requirements (since no cars are driving around and no one is walking inside), lower insurance costs, lower personnel expenses, land savings, etc. the overall development costs can be significantly lower than for a conventional garage.

In addition, this system offers a pollution free alternative. No cars are running inside, so there are no choking car emissions to have to deal with inside the garage. Also, because cars are not having to circle around and around the block looking for spaces, there is less pollution (and less traffic) from cars driving at slow paces for extended periods of time. They get off the street faster!

It is ideally suited for condominium, apartment, hotel, small office building development projects where land is very limited (and expensive) and a large part of the success of the project is dependent upon the capability to fill the parking requirements, which can't be easily met with a conventional garage. The RPS 20 series in these cases is a developer’s dream!

The facade is completely flexible and can be designed to blend in with the neighboring buildings with a look that is contemporary, historic, traditional etc. The materials that can be used are completely versatile as well — concrete, wood, brick, stone, aluminum, etc. It is completely up to the imagination of the owner and his architect.

From a user perspective, it is a very safe and convenient system. The system virtually eliminates the risk of any vehicle damage or theft and the risk of personal injury or robbery that can occur in regular parking lots because drivers remain safely outside the building at all times. Imagine, arriving to your destination. Rather than having to spend an exorbitant amount of time driving around looking for a space to park, you drive right up to the garage, drive in at ground level into a well lit easy access entrance area, get out of your car, push a button and then you simply walk away. Hassle free!

Underground applications are particularly well suited for this system. Because only half the space is needed, one can realize as much as 50% cost savings on the excavation alone. Also, due to lower lighting and ventilation requirements (since no cars are driving around and no one is walking inside), lower insurance costs, lower personnel expenses, land savings, etc. the overall development costs can be significantly lower than for a conventional garage.

In addition, this system offers a pollution free alternative. No cars are running inside, so there are no choking car emissions to have to deal with inside the garage. Also, because cars are not having to circle around and around the block looking for spaces, there is less pollution (and less traffic) from cars driving at slow paces for extended periods of time. They get off the street faster!